Brother MFC-5890CN - Manual (Page 134)

Control panel setup
124
6
Restoring the network settings to factory default
6
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all wired and wireless network settings to the factory default.
a Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Factory Reset.
Press OK.
d Press 1 for Factory Reset.
e
Press 1 for Reboot.
Note
For DCP models, press + for Factory Reset and then press + for Reboot.
f
The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.
For MFC-5490CN
6
a Press Menu, 5, 0.
b Press 1 for Factory Reset.
c Press 1 for Reboot.
d Press Stop/Exit.
For Touchscreen models
6
a
Press MENU.
b Press Network.
c Press a or b to display Factory Reset and then press Factory Reset.
d Press Yes.
e
Press Yes for 2 seconds to confirm.