Acer Altos R920 Series - Manual (Page 105)

87
7 Install the ARMC/3 R2 NIC module.
(1) Attach the ARMC/3 R2 NIC module to the I/O expansion
module.
(2) Secure the ARMC/3 R2 NIC module to the I/O expansion
module with the two screws provided.
8 Install the ARMC/3 R2 module.
(1) Insert the standoff into the hole in the ARMC/3 R2 module
(A). The standoff installs on the bottom side of the module.
(2) Attach the module to the module connector on the I/O
expansion module and snap the standoff into the matching
hole on the I/O module (B).
9 Install the I/O expansion module. Perform instructions described
on “To install the I/O expansion module” section.
Network I/O Expansion M
odule
ARMC/3
NIC
Network I/O Expansion M
odule
ARMC/3
NIC
ARMC/3
A
B
A