beautypg.com

For mac os® 8.6 to 9.2, For mac os, 6 to 9.2 – Brother MFC-3340CN User Manual

Page 30: Mac os, Step 2, Installing the driver & software

background image

28

Installing the Driver & Software

Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 11.

1

Disconnect the machine from the power
outlet and from the Macintosh

®

, if you have

already connected an interface cable.

2

Turn on your Macintosh

®

.

3

Insert the supplied CD-ROM into your
CD-ROM drive.

4

Double-click the Start Here icon to install
the printer and scanner drivers. If the
language screen appears, select your
language.

5

Click MFL-Pro Suite to install.

6

Follow the on-screen instructions, and
restart your Macintosh

®

.

7

Connect the network interface cable to the
machine, and then connect it to a free port
on your hub.
To connect the network interface cable to
the machine:
1. Open the top cover to its open position.
2. Insert the network cable into the LAN

socket, marked with a

symbol. You

will find the LAN socket above and to the
left of the ink cartridge slots, as shown
below.

3. Carefully route the network cable

through the trench and out the back of
the machine as shown below.

Warning

Ensure that the cable does not restrict the cover from
closing, or an error may occur.

For Network Interface Cable Users (MFC-3340CN only)

For Mac OS

®

8.6 to 9.2

In case of using both USB and LAN cables,
route both cables through the trench.

Step 2

This manual is related to the following products: