Brother MFC-8640D - Manual (Page 94)

USING MFC REMOTE SETUP 5 - 1
5
MFC Remote Setup
The MFC Remote Setup application lets you quickly and easily set
up your MFC directly from your PC screen. When you access this
application, the settings on your MFC will be downloaded to your PC
and displayed on your computer screen. If you change the settings,
you can upload them directly to the MFC.
OK button
When you click OK, the process of uploading the data to the MFC
begins. The MFC Remote Setup program is closed if an error
message is displayed, enter the correct data again and then click
OK.
Cancel button
The Cancel button clears your changes and exits the MFC Remote
Setup application without uploading any data to the MFC.
Using MFC Remote Setup
(For Windows
®
)
(For MFC-8440, MFC-8640D, MFC-8840D and
MFC-8840DN only)
You can't use the MFC Remote Setup application if your MFC is
only connected to a Network with the optional Network LAN
board (NC-9100h). (See Web Based Management in the
NC-9100h Network User's Guide.)