Brother MFC 7460DN - Manual (Page 43)

Control panel setup
38
5
Function table and default factory settings
5
The factory settings are shown in Bold with an asterisk.
DCP-7055W and DCP-7057W
5
Main menu Submenu Menu selections Options
3.Network 1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
4.Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name BRWxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config Auto*
Static
7.WINS Server Primary [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
Secondary [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
8.DNS Server Primary [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
Secondary [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
9.APIPA On*
Off
0.IPv6 On
Off*