Brother PT-18R User Manual

Page 46

EDITING A LABEL

Using Auto-Format Layouts

Select Print using the

keys and then press the

key to print the label.

Preview and print options in block layouts

• When the print menu is displayed, press the

key to preview the label layout.

• To print the label directly from the Preview screen, press the

key.

• To print multiple copies, sequentially numbered copies, or a mirror image of the label,

with the print menu displayed hold down the

key and press the

key to display

the Print Options menu.

• Select "Edit" to change the text data or style settings.
• Select "Change Layout" to use a different layout.
• Select "Quit" to exit the Auto-Format function.

• Press the

key to return to the previous step.

• Refer to the Block Layouts table for a list of available block layouts.
• The “Clear All Text?” message is displayed when the

key is pressed while entering text.

Press the

key to delete all text, or press the

key to not delete the text.

• If the width of the current tape cassette does not match the set width for the selected layout,

an error message is displayed when you try to print or preview the label. Press the

key or

any other key to clear the error message, and insert a tape cassette of the correct width.

• If the number of characters entered exceeds the limit, an error message is displayed when the

key is pressed. Press the

key or any other key to clear the error message, and edit the

text using fewer characters.

• When using the Auto-Format function the label is cut with a margin on the left and right ends

regardless of the current Tape Cutting Option setting (refer to page 47).

This manual is related to the following products:

PT-18RKT