beautypg.com

Ac adapter, Inserting a tape cassette, P. 19 – Brother PT-18R User Manual

Page 25

background image

1

2

3

4

5

6

7

8

9

19

z

G

E

TTI
N

G

STA

R

TED

Inserting a Tape Cassette

AC Adapter

Connect the AC adapter directly to the P-touch.

Insert the plug on the AC adapter cord into the connector marked DC IN 9.5V on
the P-touch.

Insert the AC adapter plug into a standard electrical outlet.

Tape cassettes of 1/4", 3/8", 1/2" or 3/4" (6 mm, 9 mm, 12 mm, or 18 mm) width can be
used in your P-touch. Use only tape cassettes with the

mark.

1

2

• Turn the P-touch off before disconnecting the AC adapter.
• Disconnect the AC adapter from the P-touch and electrical outlet when you do not intend to

use the P-touch for an extended period.

• Do not pull or bend the AC adapter cord.
• Use only the AC adapter (AD-18) designed exclusively for your P-touch. Failure to observe

this may result in an accident or damage. Brother shall not assume any responsibility for any
accident or damage resulting from not using the specified AC adapter.

• Do not connect the AC adapter to a non-standard electrical outlet. Failure to observe this may

result in an accident or damage. Brother shall not assume any responsibility for any accident
or damage resulting from not using a standard electrical outlet.

Inserting a Tape Cassette

If the new tape cassette has a cardboard stopper, be sure to remove
the stopper before inserting the cassette.

WATNLA

TION

This manual is related to the following products: