Brother TD-4000 - Manual (Page 10)

10
Supplement
FAQ
Q What is the built-in memory capacity?
A It's 2MByte.
Q What is the maximum number of templates that can be
entered?
A Up to 99 templates can be entered.
However, it may not be possible to enter 99
templates if the maximum memory capacity
(2MB) is exceeded.
Q Is it possible to check templates transferred to the printer?
A Yes.
Hold down the feed button to print a list of
transferred templates.
Q Is there a tool to easily specify P-touch template settings?
A Refer to "Setting up P-touch templates" in
"Advance preparation" on page 1 of this
manual.
Q Is it possible to change the numbering of transferred
templates?
A Yes.
Edit the original template with P-touch Editor
to create a template with the numbers to be
changed.
After editing, transfer to the printer.
Q Is it possible to initialize the numbering?
A Yes.
Scan the ^ID command on P7 to initialize the
numbering.
Q What is the maximum number of digits for numbering?
A Up to 15 digits can be used.
z
Q How can the transferred data be deleted?
A Connect the printer to a computer USB
port and open P-touch Transfer Manager.
Right click the items to be deleted from the
transferred data list.
Q How can "Key Assign" be checked?
A Hold down the feed button to check "Key
Assign" along with the transferred templates.
It is also possible to check easily on a
computer using P-touch Transfer Manager.
Q Is it possible to link multiple databases to one template?
A No.
Multiple databases cannot be linked to one
template.
Q Is it possible to print the date and time automatically?
A No.
The printer does not have a clock function,
and so it is not possible to automatically print
the date and time.
Note: Our QL-650TD features a clock
function.
Ｑ What kind of barcode scanners can be used?
Ａ It is possible to use a scanner with a RS-232C
(serial) connection and its own power supply.
Note: The printer cannot supply power to a
scanner.
Ｑ What should I do if there's no response after following all
the setting and scanning steps?
Ａ The settings are reset if you print from a
computer even once. Specify the settings
again, referring to "Advance preparation" on
P1.