Sterlco 140 to 6,285 Gallon Pump Tanks - Manual (Page 34)

Pump Tanks Chapter 4: Operation 34 of 67
4-6 Options – Analog Outputs
Cold Side Retransmission
The selected analog output will retransmit the Cold Side Temperature. The range of
temperature transmitted is dictated by the Cold Side Retransmission Min and Max settings.
Hot Side Retransmission
The selected analog output will retransmit the Hot Side Temperature. The range of the
temperature transmitted is dictated by the Hot Side Retransmission Min and Max.
Process 3 Way Valve
This valve is used with the Wintercooler output option. It is used to divert water around the
wintercooler to prevent over cooling.
4-7 Options – Digital Inputs
Digital inputs that are not required for the pumps and fan are configurable. The
available options can be assigned to only one input.
Alarm Silence
Allows for a push button to be installed to silence alarms.
Chiller Enable
This option allows the recirc pumps to be controlled by an outside source. When an input is
configured for Chiller Enable, the recirc pumps will not be allowed to run unless this input is
on.
Dirty Filter
Adds a Dirty Filter Alarm Input. See Alarms section of this document for more information.
Miscellaneous Alarm
Adds a Miscellaneous Alarm Input. The alarm can be configure to activate when the input is
on or off. See Alarms section of the document for more information.
Process Low Flow Switch
Adds a Process Low Flow Switch Alarm input. See Alarm section of this document for more
information
Process Low Pressure Switch
Adds a Process Low Pressure Switch Alarm input. See Alarm section of this document for
more information.