Sterlco SBFC Series Blown Film Coolers - Manual (Page 8)

Page 8 SBFC Series Blown Film Cooling Systems
1-4 Features
• Bolt-on support legs
• Condensate trap
• Insulated heavy-gauge steel cabinet designed for up to 35”
(8.7 kPa) static pressure
• Dial thermometers for discharge air and chilled water
supply/return
• Air inlet and outlet adapters
• Copper tube aluminum fin chilled water cooling coil
• Insulated drip pan
• Permanent filter
• Choice of 230/3/60 or 460/3/60 operating voltages
• 1-year warranty on parts and labor
Optional
• Pre-piped automatic 3-way chilled water control valves
• Pre-piped automatic 2-way chilled water control valves; for
use only with a distributed chilling system, not with a
dedicated chiller
• Electric blower starters for field mounting
• Blowers, with High or Low Static Pressure
Figure 1
SBFC Series Technical Specifications
Optional blower motor Shipping weights
16” (3.9 kPa) 35” (8.7 kPa) with blower
Air flow Die static static Base 16” (3.9 kPa) 35” (8.7 kPa)
rated hp/kW maximum dia. pressure pressure unit static pressure static pressure
Model no. cfm cmh in. cm hp kW hp kW lbs. Kg lbs. Kg lbs. Kg
SBFC-600 600 1,019 5 12.7 3 2.24 7½ 5.60 440 205 570 265 1,030 478
SBFC-1000 1,000 1,699 18 45.7 5 3.73 10 7.46 440 205 570 265 1,030 478
SBFC-1500 1,500 2,548 30 76.2 7½ 5.60 15 11.19 690 321 890 413 1,325 615
SBFC-2000 2,000 3,398 40 101.6 10 7.46 20 14.92 740 344 965 448 1,465 680
SBFC-3500 3,500 5,946 60 152.4 20 14.92 40 29.84 1,260 585 1,710 794 2,365 1,098
SBFC-5000 5,000 8,495 80 203.2 30 22.38 60 44.76 1,880 873 2,465 1,144 3,165 1,469
c Entering air @ 100ºF (38ºC) dry bulb, 80ºF (27ºC) wet bulb, 40ºF (4ºC) chilled water = 50ºF (10ºC) leaving air
temperature.