Sterlco SBFC Series Blown Film Coolers - Manual (Page 3)

SBFC Series Blown Film Cooling Systems Page 3
Safety Considerations
Sterling/Sterlco SBFC Series blown film cooling systems are
designed to provide safe and reliable operation when installed and
operated within design specifications, following national and local
safety codes.
To avoid possible personnel injury or equipment damage when
installing, operating or maintaining this equipment, use good
judgment and follow these safe practices:
; Follow all SAFETY CODES.
; Wear SAFETY GLASSES and WORK GLOVES.
; Use care when LOADING, UNLOADING, RIGGING or
MOVING this equipment.
; Operate this equipment within design specifications.
; OPEN, TAG, and LOCK ALL DISCONNECTS before
working on equipment. It is a good idea to remove the fuses
and carry them with you.
; Make sure that the blown film cooler is properly GROUNDED
before switching power on.
; When welding or brazing in or around this equipment, make
sure VENTILATION is ADEQUATE. PROTECT adjacent
materials from flame or sparks by shielding with sheet metal.
An approved FIRE EXTINGUISHER should be close at hand
and ready for use if needed.
; Do not jump or bypass any electrical safety control.
; Do not restore power until all tools, test equipment etc. have
been removed and the panels replaced.
; Only PROPERLY TRAINED personnel familiar with the
information within this manual should work on this equipment.