PNI RM3000-F Sensor Suite - Manual (Page 7)

PNI Sensor Corporation Doc #1016102 r04
RM3000-f & RM2000-f Sensor Suite User Manual Page 7
3.2 Sen-XY-f and Sen-Z-f Characteristics
Table 3-2: Sen-XY-f and Sen-Z-f Absolute Maximum Ratings
Parameter Minimum Maximum Units
Input Pin Current @ 25 C 50 mA
Voltage Across Coil 2.0 VDC
Storage Temperature -40 +85 C
CAUTION:
Stresses beyond those listed above may cause permanent damage to the device. These
are stress ratings only. Assuming operation with the 3D MagIC per the guidelines in this
manual, these maximum ratings will not be violated.
Table 3-3: Sen-XY-f and Sen-Z-f Characteristics 1
Parameter Min Typical Max Units
Inductance
1
500-600 H
DC resistance @ 25C 15C 30 45
Resistance versus
temperature
0.4 %/C
Weight
Sen-XY-f 0.06 [0.002] gm [oz]
Sen-Z-f 0.09 [0.003] gm [oz]
Operating Temperature -40 +85 C
Footnote:
1. 1 V peak-to-peak across the coil @ 100 kHz (sinewave). No DC bias resistance.
Measured o rthogonal to Earth’s magnetic field.