PNI RM3000-F Sensor Suite - Manual (Page 18)

PNI Sensor Corporation Doc #1016102 r04
RM3000-f & RM2000-f Sensor Suite User Manual Page 18
3.6 Soldering
Figure 3-15 and Table 3-6 provide the recommended solder reflow profile and processing
parameters for RM3000-f components. After soldering PNI components to a board, it is
possible to wave solder the opposite side of the PCB.
IMPORTANT: PNI sensors require the use of halide-free solder pastes and processes for
reflow and cleaning. Please contact PNI if you would like recommendations.
Figure 3-15: Recommended Solder Reflow Profile
PB