PATLITE WDR-LE - Manual (Page 5)

5
Wireless Data Communication System Supplementary Operation Manual [8167-C]
2. Preparation for Utilization
2.1 WDS-AUTO2 Installation
Please download the sample software from our home page.
In order to communicate from the personal computer to this product, it is necessary to set up the system prior to
use. The following explains the procedure on how to install the software, including the driver necessary to utilize
the USB, even if the Application Software is not going to be utilized.
Please
●
During installation, do not disconnect the product. The result may lead to improper installation or
corrupted data causing improper operation.
●
When installing the Application Software, log in as the "Administrator" when prompted for the User.
The Application Software may be denied access if the User is not the "Administrator" or does not have
administrator privelidges.
●
Since the WDS-AUTO2 shares the same drivers and file setting applications in the WDS-AE application, be
sure to install the WDS-AE first. Refer to the Main Manual for the installation method of the WDS-AE.
■ Download File Construction
● Instruction Manual
● Supplementary Operation Manual
● setup_ex.exe
● Device Installer (LANTRONIX)
●
USB Driver Folder
●
WDS-AE FileSetting.exe
●
WDS-AUTO2.exe
●
Setting.xml
●
WDS-AE Signal Scanner.exe
●
WDS-AE Hardware Setup.exe
●
WDR-U Driver
●
WDR-LE Driver
Application Software
(Free Sample)
WDS-AUTO2
｝