PATLITE WDR-LE User Manual
Page 23
23
Wireless Data Communication System Supplementary Operation Manual [8167-C]
3.4 Resetting Receiver (Wireless Network Reconstruction)
The selected receiver can be reset and its network reconstructed.
(For WDS-AUTO2 Version 1.14 and above)
1
Select the receiver in view of the WD list window and right-click to reset..
➡ In the WD listing window, the network configuration
of the transmitter connected to the present receiver
can be checked.
➡ When the Username is registered, it will be shown,
rather than its MAC Address being shown.
2
With the "Receiver Reset" window displayed, click it
➡ Once the receiver or transmitters displayed in the
window below disappears from the list, the network
refresh is started.
➡ When the network is properly reset, the receiver/
transmitter will be displayed in the WD list window.
Right Click
Click