PATLITE WDR-LE - Manual (Page 13)

13
Wireless Data Communication System Supplementary Operation Manual [8167-C]
■ WD List Window Icon Display
Icon Outline Description
Active Receiver Icon
* Common Icon used for
WDR-L and WDR-U
The targeted receiver is connected and the communication status is shown.
➡ The Icon to the right should show the MAC Address.
➡ When the user name is registered, it will be shown in place of its MAC
Address.
Inactive Receiver Icon
* Common Icon used for
WDR-L and WDR-U
Cannot connect to the target receiver, or the communication status shows
connection is impossible.
Active Transmitter Icon
* Common Icon used for
WDT-5E and WDT-6M
The targeted transmitter is connected and the communication status is
shown.
➡ The Icon to the right should show the MAC Address.
➡ When the user name is registered, it will be shown in place of its MAC
Address.
Transmitter Withdrawal
Status Icon
* Common Icon used for
WDT-5E and WDT-6M
The status shows the target transmitter is withdrawing from the network or
the power supply has terminated.
➡ The Icon to the right should show the MAC Address.
➡ When the user name is registered, it will be shown in place of its MAC
Address.
Transmitter’s Unknown
Status Icon
* Common Icon used for
WDT-5E and WDT-6M
The status shows the targeted transmitter is not communicating properly.
➡ The Icon to the right should show the MAC Address.
➡ When the user name is registered, it will be shown in place of its MAC
Address.
* This icon is only displayed during the Polling Mode.
Note
●
The icon display in the WD list window is updated periodically. As a cautionary note, the screen may flicker or
display differently from the actual status if transmitters frequently participate or withdraw from network activities.