PATLITE WDR-LE - Manual (Page 11)

11
Wireless Data Communication System Supplementary Operation Manual [8167-C]
3. Sample Applications
3.1 WDS-AUTO2 Application
Because the WDS-AUTO2 Application Software is a sample version, not all operations are guaranteed. Please un-
derstand because it is offered only as a sample, it has its limitations.
The previous Application software WDS-AE consisted of four applications. (Please verify the application software
operation in the Main Manual.) WDS-AUTO2 is a new edition to the above-mentioned application.
Since it contains enhanced functional improvements and compliments the WDS-AE, as an additional version, we
recommend you use it.
■ Differences from the WDS-AE
Enhanced Functionality List WDS-AE WDS-AUTO2
Transmission Mode（※１） Event Mode Only Event Mode/Polling Mode
CSV Output Notification
Notification on Signal
Tower Change Only
Notification on Signal-Tower Change/ Transmitter Participation
and Recession/ Communication Timeout Notification
Automatic Connection Function Unimplemented
Automatic Receiver Connection/ CSV File Output
(Prior to initial startup, setup is necessary.)
Username registration for a receiver Unimplemented Arbitrary names can be registered.
Network Confirmation
Notification ( ☞ pg. 22 ）
Unimplemented It can check in view of an application.
※ 1. The event mode and Polling Mode was added from the WDS-AUTO2.
• Event Mode : it is a conventional mode which receives the Signal Tower status change directly and sends a
data output when an event or change in status occurs.
• Polling Mode : it is a mode which will acquire the status information of the Signal Tower in regular intervals
and send data output when the status changes. It is a function to be utilized for an environment with a
heavy communication load, such as a large number of transmitters, etc. Although a delay may not act in
real-time in comparison to the "Event Mode", its timed inquries can suppress missing data packets when a
heavy communication load is often present.
■ Application Software Requirements
Prior to installation, first check whether the personal computer to be used will fulfill the recommended operating
conditions for the WDS-AE and AUTO2 sample applications.
The recommended environment is as follows:
OS
Windows XP sp2 or higher (32-bit version)
Windows Vista（32-bit version）
Windows 7（32 or 64 bit version）
CPU Core Duo 1.6GHz equivalent or higher
Memory 2 GB or more
Hard Disk Drive 100 MB or more of available space
Monitor Screen Resolution: 800 x 600 or higher Font: Small (100%)
Execution Authorization
Operate the software using Administrator authorization.
* If the program is used by a user without Administrator rights, access
and security restrictions may prevent it from operating properly.
Additional Requirements .NET Framework4.0 or higher installed (when using WDS-AUTO2)
Even with the recommended requirements indicated above, depending on the environmental condition of the
computer in use, there is no guarantee it will operate properly due to some connected perephrials or applications
that may not operate correctly.
■ .NET Framework Version Verification
For this software application to operate, the installation of .NET Framework 4.0 or higher is necessary. Verify the
.NET Framework version is installed in the computer to be used.
Note
●
Microsoft .NET Framework is software used to communicate between programming languages from
different systems, devices, as well as for network communications.
● WDS-AUTO2 is based on the .NET Framework application.