PATLITE FV-127JP - Manual (Page 30)

- 30 -
8. Playback Method
After performing steps [4. Installation] to [7. Mode Switch Settings], connect to the power source. The power
indicator (green LED) light should turn on.
After setting the desired playback mode, the voice message should play back.
If the red status indicator LED fl ashes, an error has occurred.
☞ Refer to pg. 38 [9. Error Table] if this occurs.
・ Refer to the table below for wiring and settings:
Do not control the voice message playback by turning the power on and off.
Possible malfunction may occur
Setting Item Reference
Wiring Method Pg. 10 5. Wiring
Adjusting Volume Pg. 20 6. Volume Adjustment
Terminal CH Input and Setting Pg. 23 7-1. Channel CH Terminal Input
Selecting Playback Mode
Pg. 25 7-2. Playback Mode
Setting SD Card Operation Pg. 31 7-3. SD Card Operation
Setting Speaker Output Pg. 36 7-5. Speaker Output
Please