PATLITE FV-127JP - Manual (Page 12)

- 12 -
5-2-3 Speaker Output Terminal Wiring
Connect the speaker. (Note Polarity)
Regarding Compatable Speakers
• The optional SPW-5E (5W) speaker is available (Sold Separately)
( ☞ Refer to pg. 38 [ ④ Horn Type Speaker])
• When installing a speaker for a customer, please follow the guidelines of the following specifi cations.
The speaker output can be changed with the setup for the output.
The speaker output can be changed with a DIP switch.
( ☞ Refer to pg. 36 [7-5. Speaker Output”])
When the speaker is set for 4W
Speaker Impedance: 8Ω
Rated Input: 4W or more
When the speaker is set for 2W
Speaker Impedance: 8Ω
Rated Input: 2W or more
• The speaker ratings should meet the specifi cations. Exeeding the limits may cause product and speaker
damage.
• If the polarity of a speaker is mistaken, volume may drop.
• For the measure against noise, shorten wires as much as possible and use shielded wire. Also, if a high-
voltage line is nearby, it is easy to receive an inductive noise, which may cause malfunction, in response to
the infl uence of noise.
㧙 㧗
SP- SP+
%CWVKQP
Please
Speaker
8Ω