PATLITE FV-127JP - Manual (Page 10)

- 10 -
5-2-1 Power Input Terminal Wiring
Connect DC24V.
Current Consumption
For Maximum Load:
About 520mA
Inrush Current 9A
• Ensure wiring is properly performed before connecting power. If voltage is applied
between 0V and FG, it will cause a short circuit, and the power source will be destroyed.
• Ensure voltage polarity is correct.
• When used in a state where it is connected to the power source, please include a switch in
which the power source can be easily cut for safety.
• When using non-voltage contacts, such as a relay switch for power source wiring, please
select in consideration of the rush current. If capacity is insuffi cient, it will cause welding of
the contacts and malfunction.
• Use the rated voltage supply when located in a quiet location to avoid white noise.
㸩 㸫
24V 0V
㸩 㸫
0V FG
%CWVKQP
Please