NORD Drivesystems BU0100 - Manual (Page 29)

Options / Accessories SK 1xxE
BU 0100 GB Technical Modifications Reserved 29
5.5.1 AS interface as additional assembly
An AS interface can be optionally integrated into the housing
cover of a series SK 1xxE motor starter. In exchange for the
standard closed terminal box cover, there is an assembly for
the SK140E and for the SK 150E / SK 160E.
SK 140E Type: SK IU1-AS1 (Mat. No.:
275101910)
SK 150E/ SK 160E Type: SK IU2-AS1 (Mat. No.:
275101920)
5.5.2 AS interface as additional optional assembly
For the SK 160E, with the use of the assembly –MS
(Harting HAN 10E plug connector) there is
alternatively the possibility of leading out the
connections for the AS interface via the terminal box.
For this, the plug connector is mounted flush left on
the terminal box at the factory. The fitting of the
connections for the AS interface is then next to the
plug connector.
This version cannot be retro-fitted.
(Æ See also Section 5.5.1 ).
AS Interface
connection
Probe
connection 2
Probe
connection 1
AS Interface
connection
Probe
connection 2
Probe
connection 1