Milestone XProtect Go 2014 - Manual (Page 147)

Milestone XProtect ® Go 2014 Administrator's Manual
www.milestonesys.com 147 Advanced configuration
Component Requirement
Number of images
The number of images you want to include in the email. You can
include between 1 and 20 images.
Time between images (ms)
Minimum time (in milliseconds) to be between each image. You can
set any time range between 0 and 300 seconds (5 minutes).
Embed images in email Select the check box to embed images directly in the email.
Server Settings (email)
Specify the following server settings for email:
Component Requirement
Sender e-mail address
Enter the email address you wish to use as the sender of the email
notification.
Outgoing mail server address
(SMTP)
Type the name of the SMTP (Simple Mail Transfer Protocol) server
which you want to use to send the email notifications.
Compared with other mail transfer methods, SMTP has the
advantage that you avoid automatically triggered warnings from
your email client. Such warnings may otherwise inform you that
your email client is trying to automatically send email messages on
your behalf.
TLS (Transport Layer Security) and its predecessor, SSL (Secure
Socket Layer), are supported.
Outgoing mail server port
(SMTP)
Type the port for your mail server. The default port number is 25.
Server requires login
Select the check box if you must use a user name and password to
use the SMTP server.
Security type
Choose the type of security you want to use.
User name
Only relevant when you have selected Server requires login.
Specify the user name required for using the SMTP server.
Password
Only relevant if you have selected Server requires login. Specify
the password required for using the SMTP server.
Max attachment size (MB) Specify a maximum size of attached images.