FUTEK IHH500 Series - Manual (Page 8)

8
The IHH500 can store up to 15 profiles with channel 2 through 15 being user selectable.
1. Menu
2. Sensor Profile
3. New Channel
4. Set channel using left and right
arrow keys followed by Enter
5. Sensor Config and choose sensor
output type
6. Direction
7. Unit Selection
8. Sensor Capacity
9. Sensitivity (+)
10. Sensitivity (–) if applicable
11. Serial Number, (Serial number on
sensor)
12. Back to go back one menu
13. Save Changes
14. Back to exit Main Menu and put the
IHH500 into normal reading display
Profile Quick Setup (Calibration)