FUTEK IHH500 Series - Manual (Page 12)

12
VOLTAGE OUTPUT
Output Type Setup:
1. Menu
2. Output Config.
3. Voltage Config.
4. Select Bi-polar or Uni-polar
Turn on voltage output:
5. Back to exit to main menu
6. Interfaces
7. Voltage Output
8. Select Enable
9. Back to exit to main menu
10. Back again to exit menu and return to display
CURRENT OUTPUT
Output Type Setup:
1. Menu
2. Output Config.
3. Current Value
4. Select the appropriate current output range
5. Current Config.
6. Select Uni-direction or Bi-direction
Turn on current output:
7. Back to exit to main menu
8. Interfaces
9. Current Output
10. Select Enable
11. Back to exit to main menu
Analog Output Quick Setup