FUTEK IHH500 Series - Manual (Page 11)

11
To lockout the ability to create, edit, or delete a calibration
profile in the IHH500, use the Lock Settings menu.
LOCK SETTING MENU
1. Menu
2. Lock Setting
a. Lockout Profile
b. Unlock Profile
c. Change Password
LCD SETTINGS
1. Menu
2. LCD Setting
a. Contrast
b. Brightness
c. Auto LCD Off
Profile Lockout and LCD Settings
The default lockout password will be the serial number on
the back of the IHH500.
The password can be changed to a new numerical
combination.
The LCD contrast and brightness can be set to maximum
and the levels can be saved as default for all future usage
of the IHH500.
Use the left and right arrow keys to increase or decrease
the brightness and contrast of the LCD display in the LCD
display setup menu.
A message stating, “Selected feature is not available at this
time,” will be displayed when profile control is
locked out.
TIPS FOR PROFILE LOCKOUT & LCD SETTINGS
IHH500
Battery
Enter
Exit
Shunt Power
Display
Back
Tare
Gross
Reset
Track
Hold
Unit Menu
SELECTED FEATURE
IS NOT AVAILABLE
AT THIS TIME
(HIT ENTER/BACK)