FUTEK IPM650 Series - Manual (Page 7)

7
RELAYS
PIN SYMBOL DESCRIPTION
C1 –R2 Solid State Relay 2 (–)
C2 +R2 Solid State Relay 2 (+)
C3 –R1 Solid State Relay 1 (–)
C4 +R1 Solid State Relay 1 (+)
ANALOG OUTPUT
PIN SYMBOL DESCRIPTION
D1 –VOUT Voltage Output (–)
D2 +VOUT Voltage Output (+)
D3 G Ground (current)
D4 IOUT Current Output
7
Ground (G) connections can be used to
connect a cable shield. Strain Gauge Input is for sensors with a
mV/V output level. Green screw terminals can be
removed to allow easy access to
connect the wires.
TIPS FOR WIRING
332179_Futek_IPM650_r2.indd 7 332179_Futek_IPM650_r2.indd 7 9/11/13 9:32 AM 9/11/13 9:32 AM