FUTEK IPM650 Series - Manual (Page 13)

13 13
Bi-polar and Uni-polar for voltage
confi gurations will determine if the
output would be ±5VDC for both
directional outputs from the sensor, or
map the directional outputs from 0 to
+5VDC with the zero at 2.5VDC. Uni-direction or Bi-direction for current
will determine if the current output range
is for the positive output of the sensor, or
if the zero should be shifted to allow the
selected current output range to adjust
for both directions from the sensor.
TIPS FOR ANALOG OUTPUT
332179_Futek_IPM650_r2.indd 13 332179_Futek_IPM650_r2.indd 13 9/11/13 9:32 AM 9/11/13 9:32 AM