FUTEK IPM650 Series - Manual (Page 4)

4
Buttons
Channel
Enter
Unit
Tare/Gross
Exit
Shunt
Display
Back
Track/Hold
Reset Power
Menu
Displays Channel Information
IN MENU MODE: Enter
Toggles between engineering units (force,
torque, pressure, and displacement) and the
standard mV/V.
IN MENU MODE: ▶ Arrow
Toggles between displaying the tare and gross
values. Used to remove any fi xture weights.
IN MENU MODE: ▲ Arrow
Performs a shunt action using internal resistor
IN MENU MODE: Exit
Resets peak/valley
IN MENU MODE: ◀ Arrow
ON/OFF
IN MENU MODE: ON/OFF
Start navigation
IN MENU MODE: n/a
Changes display to show peak, tracking,
valley, or all values
IN MENU MODE: Back
Freezes the current reading. HOLD will appear
on the LCD when active. Pressing any key on
the keypad will cancel the hold command.
IN MENU MODE: ▼ Arrow
332179_Futek_IPM650_r2.indd 4 332179_Futek_IPM650_r2.indd 4 9/11/13 9:32 AM 9/11/13 9:32 AM