Dwyer MPC User Manual
Page 11
SECURITY LEVEL SELECTION
Three levels of security are provided. The
SECr
menu item security level may be viewed or
changed at any time regardless of the present security level in the Secure menu. The
display shows the current security level. To change security levels change the password
value using the UP ARROW or DOWN ARROW keys and pressing the
ENTER key. Refer to the password table (following) for the correct value to enter for the
security level desired.
To set the access level to, for example,
2
, at the
SECr
menu item press the
UP ARROW key until the upper display shows the password,
1101
. Press the
ENTER key. The display will blink, and return with the level value,
2
, i n the
upper display.
The password values shown in the table cannot be altered. Retain a copy of these pages
for future reference. This is the only reference made to password values in this instruction
book.
Password Table
ause
ed,
eys.
et at
at is
s 24
splay
enu,
ure
10
Menu
Secondary
Secure
Secondary
Secure
Secondary
Secure
Security Level
Status
Locked
Locked
Unlocked
Locked
Unlocked
Unlocked
Displayed Value
When Viewed
2
3
4
Password
Value To Enter
1101
1011
111
L-20:L-20 2/24/11 10:00 AM Page 10