Dwyer TFP-GV - Manual (Page 3)

F-20-TFP-G, pg. 3 of 27
A. Introduction
1. Unpacking
All sensors are suitably packaged to prevent damage during shipping. If
external damage is noted upon receipt of the package, please contact
the
shipping company immediately. Dwyer Instruments is not liable for damage
to the device once it has left the manufacturing premises.
Open the package from the top, taking care not to cut too deeply into the
package. Remove all the documentation and contents. Take care to remove
all the items and check them against the packing slip. The products should
also be checked for any concealed shipping damage. If any shortages or
damage is noted, please contact the shipping company and/or Dwyer
Instruments to resolve the problem.
Typical Contents of Box
Sensor, Calibration Certificate & Instruction Manual
(Model TFP-GV shown, other models similar).
CAUTION: Take care not to drop your sensor or subject it to
sudden impact. Read the installation section of this manual before
providing power or tubing connections to the unit. Any damage
caused by improper installation or careless handling will not be
repaired under warranty (see limited warranty on page 27 for
more details).