Dwyer DMF - Manual (Page 44)

APPENDIX 6
NOTE: Follow Return Procedures In Section 1.3.
41
WARRANTY
Dwyer Mass Flow Systems are warranted against parts and workmanship for
a period of one year from the date of purchase. Calibrations are warranted
for up to six months after date of purchase, provided calibration seals have
not been tampered with. It is assumed that equipment selected by the cus-
tomer is constructed of materials compatible with gases used. Proper selec-
tion is the responsibility of the customer. It is understood that gases under
pressure present inherent hazards to the user and to equipment, and it is
deemed the responsibility of the customer that only operators with basic
knowledge of the equipment and its limitations are permitted to control and
operate the equipment covered by this warranty. Anything to the contrary will
automatically void the liability of Dwyer and the provisions of this warranty.
Defective products will be repaired or replaced solely at the discretion of
Dwyer at no charge. Shipping charges are borne by the customer. This war-
ranty is void if the equipment is damaged by accident or misuse, or has been
repaired or modified by anyone other than Dwyer or factory authorized serv-
ice facility. This warranty defines the obligation of Dwyer and no other war-
ranties expressed or implied are recognized.
TRADEMARKS
Dwyer 7 is a registered trademark of Dwyer Instruments.
Buna 7 is a registered trademark of DuPont Dow Elastometers.
Kalrez 7 is a registered trademark of DuPont Dow Elastomers.
Neoprene 7 is a registered trademark of DuPont.
Viton 7 is a registered trademark of Dupont Dow Elastometers L.L.C.