Dwyer 3200G - Manual (Page 16)

Chapter 6 Maintenance
6.1 Overview
This chapter describes diagnostic and maintenance.
6.2 Safety Message
When the transmitter is in operation, operators should follow all
safety messages. Potential safety issues are indicated by a warning
symbol (▲). Refer to the following safety messages before
performing any operation proceeded by a (▲) symbol.
6.2.1 Warning
Page 15
Explosion can result in death or serious injury:
• Do not remove the transmitter covers in explosion-proof
environments when the circuit is powered.
• Both transmitter covers must be fully engaged to meet explosion-proof
requirements.
WARNING
Electrical shock can result in serious injury:
• When installing transmitters in close proximity of high voltage
sources (near power lines) the transmitter leads can be subject to high voltages.
• Avoid contact with the leads and terminals.
WARNING
Electrical shock can result in death or serious injury:
• Only qualified personnel can configure and wire the 3200
Smart Pressure Transmitter.
WARNING