Badger Meter Registers - Manual (Page 5)

User Manual
ABOUT THIS MANUAL
This operation manual is divided into two main sections:
• The daily use of the unit is described in
"Operation" on page 9 These instructions are meant for users
• The remaining sections and appendices are exclusively meant for electricians and technicians These provide a detailed
description of all software settings and hardware installation guidance
This operation manual describes the standard unit as well as most of the options available For additional information, please
contact your supplier
Conventions Used in this Manual
A hazardous situation may occur if the ER-420 is not used for the purpose it was designed for or is used incorrectly Please
carefully note the information in this operating manual indicated by the pictograms:
A WARNING INDICATES ACTIONS OR PROCEDURES THAT, IF NOT PERFORMED CORRECTLY, MAY LEAD TO PERSONAL
INJURY, A SAFETY HAZARD OR DAMAGE OF THE ER-420 OR CONNECTED INSTRUMENTS.
A CAUTION INDICATES ACTIONS OR PROCEDURES THAT, IF NOT PERFORMED CORRECTLY, MAY LEAD TO PERSONAL
INJURY OR INCORRECT FUNCTIONING OF THE ER-420 OR CONNECTED INSTRUMENTS.
OTEE: N A NOTE indicates actions or procedures that, if not performed correctly, may indirectly affect operation or may lead
to an instrument response which is not planned
SAFETY
Warnings
ANY RESPONSIBILITY IS VOIDED IF THE INSTRUCTIONS AND PROCEDURES AS DESCRIBED IN THIS MANUAL
ARE NOT FOLLOWED.
LIFE SUPPORT APPLICATIONS: THE ER-420 IS NOT DESIGNED FOR USE IN LIFE SUPPORT APPLIANCES, DEVICES, OR
SYSTEMS WHERE MALFUNCTION OF THE PRODUCT CAN REASONABLY BE EXPECTED TO RESULT IN A PERSONAL
INJURY. CUSTOMERS USING OR SELLING THESE PRODUCTS FOR USE IN SUCH APPLICATIONS DO SO AT THEIR OWN
RISK AND AGREE TO FULLY INDEMNIFY THE MANUFACTURER AND SUPPLIER FOR ANY DAMAGES RESULTING FROM
SUCH IMPROPER USE OR SALE.
ELECTROSTATIC DISCHARGE DOES INFLICT IRREPARABLE DAMAGE TO ELECTRONICS! BEFORE INSTALLING OR
OPENING THE UNIT, THE INSTALLER HAS TO DISCHARGE HIMSELF BY TOUCHING A WELL-GROUNDED OBJECT.
THIS UNIT MUST BE INSTALLED IN ACCORDANCE WITH THE EMC GUIDELINES (ELECTRO MAGNETIC COMPATIBILITY).
Page 5 May 2014