Specifi cations – Badger Meter CV Series User Manual
Page 3
Form #4-20-23 11/10
Page 3
Specifi cations
(continued)
LPL - Low-Loss Design (Short Form) / VILPL - Insert Version
Pipe Sizes:
½ to 60 inches and larger (13 to 1524 mm)
Pressure & Temperature:
Varies, dependent upon materials of construction
Pressure Loss:
3% of DP maximum
Turndown Ratio:
10:1
Process Connections:
LPL; NPT, fl anged, butt weld, socket weld, grooved
VILPL; Insert fi ts between pair of fl anges
Instrument Connections:
NPT, socket weld
Accuracy:
±3-5% of reading uncalibrated; ±0.5% of reading calibrated
Standard Beta Ratios:
-10, -20, -38, -65;
exact sizing available to provide custom beta ratios
CV Series
Pipe Sizes:
2 to 16 inches and larger (51 to 406 mm)
Pressure:
300 PSIG (2070 kPa) maximum
Temperature:
250 °F (120 °C) maximum
Process Connections:
NPT, butt weld, fl anged, grooved
Instrument Connections:
NPT
Standard Beta Ratios:
-38, -65
VBR Series
Pipe Sizes:
½ to 2 inches (13 to 51 mm)
Pressure:
400 PSIG (2756 kPa) maximum
Temperature:
250 °F (120 °C) maximum
Process Connections:
FNPT, socket/sweat
Instrument Connections:
NPT
Standard Beta Ratios:
-10, -20, -38, -65