Badger Meter 3100 Series Flow Monitor - Manual (Page 5)

Page 5 2-12
Installation & Operation Manual
INTRODUCTION
This manual provides installation and operation instructions for the Badger Meter Data Industrial ® Series 3000 Flow Monitor.
Product Unpacking and Inspection
Upon receipt of the product, perform the following unpacking and inspection procedures:
NOTE: If damage to the shipping container is evident upon receipt, request the carrier to be present when the
product is unpacked.
Carefully open the shipping package and follow any instructions that may be marked on the exterior. Remove all cushioning
material surrounding the product and carefully lift the product from the package. Retain the package and all packing material
for possible use in reshipment or storage.
Visually inspect the product and applicable accessories for any physical damage such as scratches, loose or broken parts, or
any other sign of damage that may have occurred during shipment.
NOTE: If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and file a claim
with the carrier. A claim for equipment damage in transit is the sole responsibility of the purchaser.
Product Description
The Badger Meter Data Industrial Series 3000 Flow Monitor is an economical, full featured, digital flow monitor.
The two line x 16-character alphanumeric display can be configured by the user to display flow rate and flow total. The panel
meter has a NEMA 4X rated front panel and conforms to DIN Standard dimensions, 96 mm X 96 mm, for meter sizes and panel
cutouts. An optional NEMA 4 wall mount is also available.
The Series 3000 Flow Monitor accepts pulse, sine wave or linear analog input signals. Like all Data Industrial flow monitors, the
Series 3000 may be field calibrated by the user. For Data Industrial sensors “K” and “offset” numbers are entered, while other
pulse or frequency output sensors may use a “K” factor only. Analog inputs are fully programmable for slope and intercept.