Badger Meter 3100 Series Flow Monitor - Manual (Page 14)

Page 14
2-12
Series 3000 Flow Monitor
DISPLAY AND KEY PAD
The Series 3000 Flow Monitor has a two line by 16-character display with two modes of operation and 5 keys on the front
panel for programming.
Menu 1-Switch to main menu
2-Backward/Previous menu
Up  1-Select Menu option
2-Increase numerical value
Enter 1-Save value
2-Forward/Next menu
Down 1-Select Menu option
2-Decrease numerical value
Right  1-Select Menu option
2-Move cursor to the right
When the Series 3000 is first powered up, it runs through internal self checks while displaying “Badger Meter DIC
Initializing." At the end of this cycle its normal mode display will appear.
In the normal mode, if still using the factory defaults, Flow Rate will be displayed on the top line, and Flow Total displayed on
the bottom. Both lines can be custom-defined in the field as desired. In the normal mode the Enter key has no function.
Figure 13: Normal Mode Display
The other mode is the program mode, used to configure the unit. Enter and exit this mode by pressing the Menu key. See the
programming flow chart.
Figure 14: Program Mode Display