Alicat P Series Pressure Gauge - Manual (Page 22)

22
MAIN
This mode defaults on power up, with fl ow
as the primary displayed parameter.
The following parameters are displayed in
the Main mode.
Line Pressure shows the pressure in the
units specifi ed at ti me of order.
Set Point: The set-point (SETPT)is shown
in the upper right of the display.
For informati on on changing the set-point
see SETPT SOURCE, page 24.
MENU: Pressing MENU switches the
screen to the Select Menu display.
MENU
SETPT
0.000
PRESS
PSIG
PSIG
+13.60
+
.
Flashing Error Message: An error message (POV = pressure
overrange) fl ashes when pressure exceeds the range of the sensor.
When any item fl ashes, the pressure measurement is not accurate.
Reducing the pressure to within specifi ed limits will return the unit to normal
operati on and accuracy.
If the unit does return to normal operati on contact Alicat.