Aleco Clear-Valu - Manual (Page 2)

- 2 -
INSTALLATION VARIATIONS
A
In-Jamb Mount Using Mounting Plate
Hinge is placed on inside of door jamb so that it is flush with door opening.
It is mounted to inside of cooler/freezer using mounting plates. This
installation is recommended for non-freezer/cooler doors.
B
Surface Mount
Hinge is mounted to inside surface of freezer door using mounting plate.
C
In-Jamb Mount Without Mounting Plate
Hinge is mounted on inside of door jamb using hinge bracket only,
no mounting plates.
Inside of Cooler/Freezer
Inside of Cooler/Freezer
Inside of Cooler/Freezer
2 1/4 ” or larger
2 1/4 ” or larger
The drawings below illustrate the three variations that can be used when mounting your Aleco Clear-Valu ImpacDor .
The thickness of your door jamb as well as how your cooler/freezer is used will determine which installation to use. The
door jamb MUST be at least 2
1/4 ” wide.
NOTE: When checking the thickness of your door jamb make sure the jamb will be substantial enough to hold the
weight of the door. Check with your cooler/freezer manufacturer if questionable.