Aleco NeoCor - Manual

NeoCor
Installation Instructions
PARTS INCLUDED: TOOLS NEEDED:
Cam Rollers
V-cam Bearings
Doors
#8 x 1/2 ” Screws
1/4 ”-20 x 2” Bolts
Lock Washers
Marker / Center Punch
Drill with 5/16” , 5/32“, & 3/8” Bits
Adjustable Wrenches
Flat-head Screwdriver
Step Stool or Ladder
Tape Measure
Utility Knife
KIT CONTENTS
[1] V-Cam Top Bearing [1] Jamb Guard
[1] Cam Roller [1] Door Panel
[4]
#8 x 1/2 ” Screws
[1]
1/4 ”-20 x 2” Bolt
[2]
Jamb Nuts
[6]
Lock Washers
Bottom Bearings
3/8 ” - 16 Thread Tap
Jambguards
[1] Bottom Bearing
[6]
3/8 ”-16 x 7/8 ” Bolts
[1] Bottom Hinge Cover [1] Top Hinge Cover
3/8 ”-16 x 7/8 ” Bolts
All quantities shown for single door only. For bi-parting applications, multiply all quantities by 2.
Jamb Nuts
#8 x 3/4 ” Screws
#8 x 3/4 ” Screws
[10]
TM