Airedale Ultima Water Cooled 75kW - 450kW - Manual (Page 14)

ULTIMA WATER COOLED Chillers
14
Chillers
Technical Manual : Part No 6259477 V1.4.0_07_2014
Design Features & Information
FEATURES
Temperature The microprocessor maintains the set supply Chilled Water temperature by sensing the
return and supply water temperatures and manages the compressor loading.
The microprocessor also monitors and displays the following measured parameters:

Supply Chilled Water Temperature

Return Chilled Water Temperature

Return Condenser Water Temperature

Suction Pressure of each circuit

Liquid Pressure of each circuit

Suction Temperature at each circuit

Superheat for each circuit
Alarms The following conditions will be detected, triggering a visual display:
Common for both circuits:

Low Supply Temperature

Emergency Stop

Water Flow
Individual for each circuit:
Individual alarms will isolate the affected circuit only.

Compressor Trip

Low Suction Pressure for each circuit

High Liquid Pressure for each circuit

Volt Free Contact Alarm Indication

Low Pressure Switch

Compressor Overload

High Compressor Discharge Temperature
Networking A Local Area Network ( ) can be used to connect a number of chiller controllers to
offer intercommunication and sequence control. This also allows the connection of
computers, printers and modems on the same communications ring. For further details
and quotation, please contact Airedale Controls.