Linearization 39 – West Control Solutions TB 45 Temperature Monitor User Manual
Page 39
Name
Value range Description
ICnf
Blockierung Konfigurationsebene (nur mit BlueControl sichtbar!)
0
Released
1
Blocked
ICal
Block calibration level (only visible with BlueControl
Ò
!)
0
Released
1
Blocked
Dis1
Selection which value should be displayed on display line 1
0
Display value
1
Limit value LC
T.Dis2
Settings for text in display 2 (max. 5 digits)
(only visible with BlueControl
Ò
!)
Linearization Lin
Only visible via BlueControl
®
!
Name
Value range
Description
U.LinT
Temperature unit of the linearization table
0
without unit
1
in Celsius
2
in Fahrenheit
3
in Kelvin
In.1 … In.16
OFF (ab In.3) -1999...9999
Input 1 … input 16
Ou.1 … Ou.16
-999.0 … 9999
Output 1 … output 16
g
Value U.LinT defines the unit of input values specified for linearization of temperature values. Value entry
in Celsius despite display of the measured value in Fahrenheit is possible.
w
Specify the input signals mV, V, mA, % or Ohm dependent on input type.
w
For special thermocouples (S.tYP = 18), specify the input values in V and the output values in the
temperature unit adjusted in U.LinT.
w
For special resistance thermometer (KTY 11-6) (S.tYP = 23), specify the input values in Ohm and
the output value in the temperature unit adjusted in U.LinT .
g
Resetting to factory setting (default)
Configuration level
TB 45
Configuration
39