Warren Controls 5800 Series Compact Globe Control Valves - Manual (Page 8)

8 2600 Emrick Blvd • Bethlehem, PA 18020 • USA • 800-922-0085 • www.warrencontrols.com 5800_IOM_RevB_0413
DIMENSIONS & WEIghTS
A
B
C
Valve shown with DL84
Actuator as typical.
For additional actuator information see Series
5800 Product Specification and the Installation
Operation and Maintenance Instructions for the
actuator in use.
DIMENSION (IN)
5840
VALVE SIzE (IN)
1/2 3/4 1 1-1/2 2 2-1/2 3 4
A
300THD 7-1/2 7-5/8 7-3/4 9-1/4 10-1/2 NA NA NA
300SWE 7-1/2 7-5/8 7-3/4 9-1/4 10-1/2 NA NA NA
150FLG 71/4 7-1/4 7-1/4 8-3/4 10 10-7/8 11-3/4 13-7/8
300FLG 7-1/2 7-5/8 7-3/4 9-1/4 10-1/2 11-1/2 12-1/2 14-1/2
B 2 2-3/8 2-1/2 3-1/4 3-3/8 4 4-3/8 5-1/4
C
Standard 5 5 5 4-7/8 4-7/8 7 7 7
Extension Bonnet 10 10 10 9-7/8 9-7/8 14 14 14
VALVE
SIzE
(IN)
WEIghT (LB)
Standard With Extension Bonnet
300ThD 300SWE 150FLg 300FLg 300ThD 300SWE 150FLg 300FLg
1/2 23 23 25 27 27 27 29 31
3/4 23 23 26 30 27 30 30 34
1 24 24 25 29 29 29 29 33
1-1/2 31 31 33 39 35 37 37 43
2 36 36 40 44 40 44 44 48
2-1/2 NA NA 64 74 NA 74 74 84
3 NA NA 77 90 NA 87 87 100
3 NA NA 120 140 NA 130 130 150
Consult factory for drawings, weights, and dimensions of fonfigurations not shown.
Actual shipping weights may vary.
DIMENSION (IN)
5843
VALVE SIzE (IN)
2-1/2 3 4
A
150FLG 10-7/8 11-3/4 13-3/8
300FLG 11-1/2 12-1/2 14-1/2
B 4 4-3/8 5-1/4
C Standard
7 7 7
Extension Bonnet 14 14 14
VALVE
SIzE
(IN)
WEIghT (LB)
Standard With Extension Bonnet
150FLg 300FLg 150FLg 300FLg
2-1/2 65 75 75 85
3 79 92 89 102
4 123 143 133 153
Face to face dimensions for NPT & SWE conform to ANSI/ISA S75.03
300# (sizes 1/2 and 3/4 inch) and S75.12 Short 300# (Sizes 1 thru 2 inch)
150 & 300FLG conform to ANSI/ISA S75.03
NA = Not Available