Warren Controls 5800 Series Compact Globe Control Valves - Manual

This document covers the installation, operation and maintenance of
the Series 5800 Compact Globe Control Valves presented in the “Series
5800 Product Specification”, including the 5840 Two-Way Single Seat
Unbalanced Valve with Cage Retained Seat and the 5843 Two-Way
Single Seat Cage Balanced Valve with Cage Retained Seat. Warren
Controls Series 5800 Compact Globe Control Valves feature rugged
high efficiency bodies of steel or stainless steel, with cage-retained
seats for ease of maintenance, and a variety of trim materials and
port sizes. The equal percentage and linear plugs provide excellent modulating control of a wide variety of fluids. The Series 5800 is
ideally suited where value and long life are important objectives
for applications including but not limited to the Chemical, Food &
Beverage, General Service, Marine, Pulp & Paper, Refining, District
Energy and Pharmaceutical Industries with temperatures from –20 to
800°F, severe service, dirty fluids, high pressure drops, and corrosive
fluids.
TABLE OF CONTENTS
Overview .............................................Cover
Valve Identification ...............................2-3
Information Present on Valve ............4-5
Body vs. Application .............................6-7
Dimensions & Weights .............................8
Installation ............................................ 9-10
Maintenance ............................................ 11
Packing Adjustment .............................. 11
Parts/Overhaul ........................................ 11
Parts Kits ..............................................11-13
Drawings..............................................14-18
Construction Details ........................19-22
5800 IOM
SErIES 58OO
Compact Globe Control Valves
PrODUCT OVErVIEW
gENErAL INFOrMATION
The instructions given herein cover generally the operation and
maintenance of subject equipment. Should any questions arise which
may not be answered specifically by these instructions, they should
be referred to Warren Controls Inc. for further detailed information
and technical assistance. This manual cannot possibly cover every
situation connected with the operation, adjustment, inspection,
test, overhaul and maintenance of the equipment furnished. Every
effort is made to prepare the text of this manual so that engineering
and design data is transformed into the most easily understood
wording. Warren Controls Inc., in furnishing this equipment and
this manual, must presume that the operation and maintenance personnel assigned thereto have sufficient technical knowledge and
experience to apply sound safety and operational practices which
may not be covered herein. In applications where Warren Controls
Inc. furnishedquipment is to be integrated with a process or other
machinery, these instructions should be thoroughly reviewed to
determine the proper integration of the equipment into the overall
plant operational procedures. Warren Controls does not assume
responsibility for the selection, use, or maintenance of any product.
Responsibility for proper selection, use, and maintenance of any Warren
Controls product remains solely with the purchaser and end-user.
5800_IOM_RevB_0413