Warren Controls 5800 Series Compact Globe Control Valves - Manual (Page 5)

5 Series 5800 5800_IOM_RevB_0413
PArT NUMBEr & SErIAL NUMBEr
Information Symbol(s) Location Notes
Part number
(Configuration) P/N On actuator • On Actuator Nameplate attached to actuator.
Serial number S/N On actuator
and
valve body • On Actuator Nameplate attached to actuator.
• Sales order number only stamped on flat boss on valve body between end connections 5800).*
* Number stamped using approximately 1/8 inch tall characters
FLOW DIrECTION(S)
Information Symbol(s) Location Notes
Flow direction
through valve On valve
body • On Flow Arrow Plate attached to valve body bonnet flange between the end connections.*
INPUT SIgNAL, SUPPLY & SErVICE
Information Symbol(s) Location Notes
Input signal SIG On actuator • On Actuator Nameplate attached to leg(s) of actuator.
Supply pressure SUP or
SUPPLY
On actuator • On Actuator Nameplate attached to leg(s) of actuator.
VALVE ATTrIBUTES
Information Symbol(s) Location Notes
Maximum
temperature rating
of valve body TMAX or
Tmax
On actuator
and
valve body • On Actuator Nameplate attached to leg(s) of actuator.
• On Industrial VBA Nameplate attached to valve body bonet flange between the end
connections on side oposite flow arrow plate.
Trim Cv
(flow coefficient) Cv On valve
body • On Industrial VBA Nameplate attached to valve body bonet flange between the end
connections on side oposite flow arrow plate.
Trim style
(Characteristic) CHAR On valve
body • On Industrial VBA Nameplate attached to valve body bonet flange between the end
connections on side oposite flow arrow plate.
Trim material TRIM
MATL
On valve
body • On Industrial VBA Nameplate attached to valve body bonet flange between the end
connections on side oposite flow arrow plate.
Valve body
material On valve
body • If WCB is cast on the valve, and or the factory applied paint is gray, the valve body
material is steel. If CF8M is cast on the valve the valve body material is 316 stainless steel.
INFOrMATION PrESENT ON CONTrOL VALVE