Warren Controls 5800 Series Compact Globe Control Valves - Manual (Page 2)

2 2600 Emrick Blvd • Bethlehem, PA 18020 • USA • 800-922-0085 • www.warrencontrols.com 5800_IOM_RevB_0413
To use these instructions it is necessary to identify the configuration
of the valve. Factory assembled control valves have a nameplate
mounted on the actuator. The valve’s part number (P/N) is present
on the plate. The part number represents the configuration of the
control valve. To identify the valve’s type, size, actuator, accessories,
and other characteristics decode the part number using configura-
tion table. If the information is incomplete, incorrect, or not pres-
ent contact the factory with the valve serial number listed on the
plate. (See Information Present on Control Valves section for location
of part number, serial number, and other important information on
valve.)
VALVE IDENTIFICATION
Size
050
1/2 inch
075
3/4 inch
100
1 inch
150 1-1/2 inch
200 2 inch
250 2-1/2 inch
300 3 inch
400 4 inch
Body
Material
W WCB
F CF8M
End
Connection
F 150 lb. Flanged
G 300 lb. Flanged
S NPT Screwed
W Socket Weld
Trim
Style
E Equal %
L Linear
Packing
Type
T Teflon
G Graphite
V Vacuum
Service
Model Bonnet
Construction
S
PEEK Bearings
8
Z PEEK
Bearings
H
Alloy Bearings
X
Alloy 6 Bearings
w/ Ext Bonnet
G
Graphalloy
Bearings
w/ Ext Bonnet
VALVE BODY
58N
1/2”-2” Bodies
Diaphragm:
49” or 84”
Cylinder:
4” or 6”
58H
2.5”-4”
Bodies
Diaphragm:
84” or 115”
Cylinder:
6” or 8”
Trim Material
S 316 Stainless
Steel*
T TFE Soft Seats
P PEEK Soft Seats
6 Alloy 6 Wrapped
316SS
7 400 Stainless Steel
8 Alloy 6 Wrapped
400SS
Trim Cv
F Full Port
1 1st Port
Reduction
2 2nd Port
Reduction
3 3rd Port
Reduction
4 4th Port
Reduction
Valve
Type
40
Single Seat
2-Way,
Unbalanced
w/Cage
Retained
Seat
43
Single Seat
2-Way, Cage
Balanced
w/Cage,
Retained
Seat
TS Teflon Packing; Peek
Bearings
GS Graphite Packing; Peek
Bearings
VS Teflon Packing; Peek
Bearings; Vacuum Service
T8 Teflon Packing; Z Peek
Bearings
G8 Graphite Packing; Z Peek
Bearings
V8
Teflon Packing; Z Peek
Bearings; Vacuum Service
GH
Graphite Packing and
Gaskets; Alloy 6 Bearings
GX
Graphite Packing and
Gaskets; Alloy 6 Bearings ,
Extension Bonnet
GG
Graphite Packing and
Gaskets; Graphalloy
Bearings , Extension
Bonnet
NOTE: S and W
only available in
1/2” - 2” sizes.