beautypg.com

Thermo Fisher Scientific Alpha TDS 200 User Manual

Page 6

background image

2

2 SAFETY INFORMATION

This Controller/Transmitter shall be installed and operated only in the manner specified in
the Instruction manual. Only skilled, trained or authorized person should carry out
installation, setup and operation of the instrument.

Before powering up the unit, make sure that power source it is connected to, is as
specified in the top label. Failure to do so may result in a permanent damage to the unit.

The unit has live and exposed parts inside. If it has to be opened, make sure that the
power to the unit is off and disconnected.

The unit is Fuse protected. In the event the fuse has to be replaced, use only those as
specified in the manual.


The degree of protection against electric shock will be achieved only by
observance of the corresponding installation rules.