beautypg.com

Thermo Fisher Scientific Alpha TDS 200 User Manual

Page 28

background image

24

Press ▲and ▼keys together (ESCAPE) at anytime, to leave the Setup mode and return
to Measurement mode.

P8.0: Controller reset
1.

Key in the password “022” as per procedure in Section 5.

2.

Press ▲key until screen displays P8.0 and RST. Press ENTER.

3.

Screen will scroll P8.1, then ‘No’.

4.

Press ▲or ▼keys to toggle between YES and NO. Press ENTER to confirm
selection.

5.

Press ▲and ▼keys together (ESCAPE) to return to P8.0. Press ▲and ▼keys
together again, to return to measurement mode.