Thermo Fisher Scientific Alpha pH 600 RF (In the process of updating the brand guideline & product image) - Manual (Page 8)

- 2 -
ƒ all information and warnings in the documentation dealing with the
products used together with this pH / ORP Transmitter (housing, sensors,
etc.).
ƒ the local environmental and operational conditions.
1.3 Safety Instructions
ƒ The Alpha pH 600 RF Transmitter should be installed
and operated only by personnel familiar with the
instrument and who are qualified for such work.
ƒ A defective pH 600 RF Transmitter must neither be
installed nor put into service.
ƒ The Alpha pH 600 RF Transmitter must only be
operated under the specified operating conditions (see
section 6).
ƒ The Alpha pH 600 RF Transmitter must not be repaired
by the customer.
ƒ No modifications to the Alpha pH 600 RF Transmitter
are allowed. The manufacturer/supplier accepts no
responsibility for damage caused by unauthorized
modifications. The risk is borne entirely by the user.
1.4 Taking Out of Service / Correct Disposal of the Unit
Taking out of Service
ƒ First disconnect the unit from the power supply and then undo all electrical
connections.
ƒ Remove the unit from the wall.
Correct Disposal of the Instrument
When the Alpha pH 600 Transmitter is permanently taken out of service, obey the
local environmental regulations for correct disposal or send the instrument to your
local distributor, they will take care of proper disposal.