Thermo Fisher Scientific Alpha pH 600 RF (In the process of updating the brand guideline & product image) - Manual (Page 29)

- 23 -
5 S E T U P M O D E
5.1 Enter Setup mode
In the Setup mode the transmitter can be configured to the individual requirements.
MEAS
°C
READY
ATC
pH
“User-Setting” Mode
(User can only
view parameters)
ENT ENT
ENT
“User-setting” Mode
(User can change
parameter settings)
1. While in measurement mode, press the ENT key.
2. The display prompts to enter the security code. Set the security code with ▲ or
▼ key to:
“SCD 22” to change parameter settings
“SCD 0” to view parameter settings only (view only mode)
3. Press the ENT key.
NOTE: To exit from any intermediate steps, press ▲ and ▼ keys (Escape)
together. It will return to measurement mode.