Thermo Fisher Scientific Eutech pH 700/Ion 700 - Manual (Page 5)

2
2. GETTING STARTED
2.1 Keypad Functions
Powers the meter on and off. Upon power on, the meter
automatically begins in the mode that was last used.
Calibration and memory values are retained even if meter
is unplugged.
Toggle between available measurement modes;
pH/Temp, mV/Temp, or ppm/mV (Ion 700 only).
Also used to switch from pH to Temp during pH
calibration mode.
Press and hold for 5 seconds to enter SETUP mode.
Toggles between measurement and calibration modes.
In SETUP mode, returns user to the measurement mode.
MI (Memory Insert) stores values into memory.

Increase value. Scroll up in SETUP mode.
MR (Memory Recall) recalls values from memory

Decrease value. Scroll down in SETUP mode.
Freezes measured reading. Press again to resume
live reading.
Confirms calibration values in CAL mode.
Confirms selections in SETUP mode.
View recalled values in memory mode.